Latches; Latch Accessories And Adapters - Schlage AL-Series Service Manual

Latches

Latches
Part number
Springlatch Deadlatch
11-068 11-085
11-069 11-088
11-110 11-104
11-111 11-091
11-112 11-092
11-116 11-096
11-113 11-105
11-118 11-103
11-116

Latch accessories and adapters

Part number Description
37-001 Metal door reinforcement kit for M\," and 1" diameter housings. (Specify door thickness)
39-030 *
Adapts a square corner latch and a 2
41-005 ** 5" Backset extension link (must be used with 2Z\," backset latches)
A501-565 Reinforcement for non-reinforced metal doors 1C\," thick. Fits both M\," and 1" diameter housings
A501-566 Reinforcement for non-reinforced metal doors 1C\v" thick. Fits both M\," and 1" diameter housings
A501-567 3Z\x" long latch housing sleeve, reinforcement for joint between latch and backset link, or to hold latch in metal doors
A501-878 Faceplate adapter to adapt 1" faceplate to 1Z\," door preparation
G506-815 1" long latch housing sleeve to adapt M\," diameter housing to 1" latch bore
37-001
Sleeve, A501-567
Reinforcement
A501-566, 1 " door
C\,
A501-567, 1 " door
C\v
* 39-030 Rabbeted latch and strike kit is available for Springlatch and Deadlatch applications. Available in 605 and 626 finish only.
** 41-005 requires: 1) reinforcement when used in hollow metal doors, and 2) one G506-815 sleeve when used with 1" latch holes.
Backset Housing Description
diameter
Square corner, 1" x 2Z\v"
2 C\, " M\, "
Z\v
1" 1" circular drive-in, (605 and 626 finish only)
Square corner, 1" x 2Z\v"
2 C\v " M\, "
Z\v
1" Square corner, 1Z\," x 2Z\v", standard
1" circular drive-in, (605 and 626 finish only)
1" Square corner, 1Z\," x 2Z\v"
3 "
C\v
11-096
" high square corner strike to a Z\x" rabbeted door and frame preparation
C\v
41-005
" radius round corner, 1" x 2Z\v"
" radius round corner, 1" x 2Z\v"
11-104
G506-815
Note: 2 C\, " backset latches
Î
require backset extension
link 41-005. See "Latch
Accessories and Adapters"
below.
Specify latch finish: 605,
Î
606, 609, 612, 613, 619,
625, 626, 643.
39-030
Spacer for latch
Shield for strike
Schlage • AL-Series service manual • 31