Cleaning Of Detectors - Hitachi HT-4139-48 Instruction Manual

2.5.1 Cleaning of Detectors

When the Front Cover is open, it may close naturally and catch your
CAUTION Caution
hand. Be sure to hold the cover with one hand when operating while
the cover is open.
Be careful so your watch, bracelet, cuff, or necktie do not get caught
CAUTION
Caution
by a projection or damaged by the metal part.
How to clean parts are shown below.
Cleaning of Detectors
Gauze
Detector
Cleaning of Detector［PC11］
Detector [PC11]
［PC21］ ［PC22］ ［PC31］ ［PC41］ ［PC42］ ［PC51］ ［PC52］
Gauze
Hopper
① Open the Main Cover
② Twist gauze, wet cloth, etc. around
fingers and clean parts as shown
in the left. In the case of PC22
① As indicated in the picture on the
left, slide your fingers under the
Hopper and push up.
② Twist gauze, wet cloth, etc. around
fingers and clean the detector
[PC11].
* Look under the Hopper. PC11 is
located on the left wall of the
Hopper.
Be careful not to pinch your fingers.
2. Operation
２
.
2-15