1.3 Part Names and Functions
FRONT side
Top Latch Button
To open the Top Cover to remove
jammed papers.
Main Cover
Power Connector
Connect power
cable
Cover for accessing ink ribbon
Open to replace ink ribbon by pushing it.
Do not open the cover too much.
Main power switch
Usually the main power switch should be kept ON (
power switch.
If you do not use the device for a long time, the main SW should be OFF(O side).
CAUTION
Do not put things on this cover.
Stacker-R
Ejects scanned papers
Stacker is selected by the host.
Top Cover
Ejects scanned papers
Stacker is selected by the host.
Main Latch Button
To open the Main Cover to
remove jammed papers.
side) and turn ON/OFF the device by the
1. Overview
Stacker-A
Power switch
Turn ON/OFF power.
Hopper
Put papers to be scanned
Sheet Guide
Align papers on the hopper.
1
1-3