Pro-Form L.E.X.2 User Manual page 7

Low impact elliptical crosstrainer
Table of Contents

Advertisement

7. Align the indicated holes in the Incline Frame (2) with
the tube on the Base (1). (Note: The Wheels on the
Pedal Arms [not shown] should be on top of the Incline
Frame.) Insert the Incline Axle (75) through the left
side of the Incline Frame, through two Plastic Spacers
(56), through the tube on the Base, through two more
Plastic Spacers, and through the right side of the
Incline Frame. Using two adjustable wrenches, tighten
a 3/8Ó Screw (59), with a Lock Washer (58) and a Flat
Washer (57), into each end of the Incline Axle.
Tap the two Incline Frame Endcaps (55) into the
Incline Frame (2).
Remove the backing from the two Bumpers (62).
Press the Bumpers onto the underside of the Incline
Frame (2) where the Incline Frame touches the front
Stabilizer (30).
8. Raise the left Pedal Arm (12). Attach a Pedal (60) to
the Pedal Arm with three Black Screws (44).
Attach a Pedal (60) to the right Pedal Arm (not shown)
as described above.
9. Make sure that all parts of the elliptical exerciser are properly tightened. To protect the floor or carpet
from damage, place a mat under the elliptical exerciser.
7
55
62
62
30
2
57
58
59
8
44
7
56 56
57
1
Tube
Hole
75
60
12
58 59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pfel85570

Table of Contents