Download Print this page

Installation - Prem-I-Air EH1668 Installation And User Manual

1.5kw ptc fan heater with pir

Advertisement

These instructions should be read carefully and left with the user of the product for
future reference.
Place the EH1668 on a firm flat surface at least 20cm (8") from a wall. Ensure that
the air inlets (at the back) and the air outlets (on the front) are not obstructed.
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision
Do not direct the hot air output towards curtains or soft furnishings.
Leave a gap of at least 100mm (4") at the sides of the heater.
Do not place on soft surfaces.
Do not cover. This symbol shown on the casing of the heater
means that the heater should not be covered.
Do not use outdoors.
Do not use in bathrooms, or in wet or damp locations.
Do not place the mains lead beneath a carpet or rug.
Do not use the heater in locations where paint, petrol or other flammable liquids
are used or stored.
Do no insert any object into the heater through the grilles. This may damage
the heater or result in overheating or electric shock.
If the unit is not to be used turn off at the switch at the rear of the unit and
disconnect from the mains supply.
IMPORTANT
Installer and Users please note:

INSTALLATION

Page 2

Advertisement

loading