Advertisement
4
3
5
1. On/off button
2. Upper heater button
3. Lower heater button
4. Oscillating button
5. Grille
6. Base
7. Wing nut screws
8. Tip-over switch
9. Cable and plug
To connect the base, ensure the appliance is placed on a stable, flat and
horizontal surface. Unscrew the wing nut screws and move the base into position.
Allow the cable to pass through the hole in the middle. The base can now be fixed
in place using the wing nut screws.
ASSEMBLY / INSTALLATION
2
1
6
7
9
3
7
8
Advertisement
