Samsung VP-D530 Service Manual page 18

4. Functions of each button on the SET key
Button
MENU SELECTOR push (Confirm)
MENU SELECTOR down (Data Down)
MENU SELECTOR up (Data Up)
EASY (Mode Up)
CUSTOM (Mode Down)
5. How to set up the camera adjustment mode
STEP 1
1) Connect the power source
(battery/DC cable).
2) Open Housing from video
camera.
3) Set the "POWER(CAMERA/PLAY-
ER)" switch to "CAMERA" position.
4) The OSD appears.
ADJ ITEM
VCR ADJ
CAM ADJ
CAM DISP
DSC ADJ
LCD/CVF ADJ
DSC F/WRITE
Note : "XX" indicates variable values.
Samsung Electronics
Stores changed value in the adjustment and auto adjustment mode.
Changes data in the adjustment state.
Changes mode.
STEP 2
1) Press and hold the "STOP" button
2) When monitor OSD appears as
3) Move the MENU SELECTOR to
4) When changing the adjustment
5) You can change the adjustment
6) After setting adjustment value,
STEP 3
Monitor OSD shows "
Then camera adjustment mode has
been activated successfully.
Alignment and Adjustment
Description
and "EASY" button on the video
camera at the same time for more
than 5 seconds.
shown below, the adjustment mode
has been activated successfully.
highlight CAM ADJ and push the
MENU SELECTOR.
item, please press the "EASY/
CUSTOM" button on the camera.
value to move the MENU SELEC-
TOR up or down.
please push the "MENU SELEC-
TOR" to confirm DATA.
CAMERA ADJ OCD
".
EPR : FF EVR : FF
4-5