DIAGNOSTICS CHART WITH SELECT MONITOR
Step
22
CHECK VDCCM.
1) Connect all connectors.
2) Erase the memory.
3) Perform inspection mode.
4) Read out the diagnostic trouble code.
Is the same diagnostic trouble code as in
the current diagnosis still being output?
23
CHECK ANY OTHER DIAGNOSTIC TROU-
BLE CODES APPEARANCE.
Are other diagnostic trouble codes being out-
put?
Value
Same DTC indicated.
Other DTC indicated.
VDC-207
VDC (DIAGNOSTICS)
Yes
Replace VDCCM.
Go to step 23.
<Ref. to VDC-8,
VDC Control Mod-
ule (VDCCM).>
Proceed with the
A temporary poor
diagnosis corre-
contact.
sponding to the
diagnostic trouble
code.
No