Subaru LEGACY 2003 Service Manual page 186

DIAGNOSTICS CHART WITH SELECT MONITOR
VDC (DIAGNOSTICS)
6 CHECK BATTERY SHORT OF HARNESS.
1) Turn ignition switch to ON.
2) Measure voltage between VDCCM and
chassis ground.
Connector & terminal
(F87) No. 63 (+) — Chassis ground ( − − − − )
(Lateral G sensor):
(F87) No. 78 (+) — Chassis ground ( − − − − )
(Pressure sensor):
Is the measured value less than the speci-
fied value?
Step Value
0.5 V
VDC-184
Yes
Replace faulty Repair or replace
sensor. harness connec-
tor between
VDCCM and faulty
sensor.
No