Panasonic KX-TD816RUKX-TD1232RU Installation And Programming Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Telephone System
  5. KX-TD816RUKX-TD1232RU
  6. Installation and programming manual
Panasonic KX-TD816RUKX-TD1232RU Installation And Programming Manual

Panasonic KX-TD816RUKX-TD1232RU Installation And Programming Manual

Digital super hybrid system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Added and Changed Features for
Installation Manual and Programming Tables
Please read this manual first and then the Installation Manual.
In this manual, the last letter "RU" o r "CE" of each model number is omitted.
ROM Version : KX-TD816RU — P371A/P372A; KX-TD1232RU — P271A/P272A;
and later versions
Digital Super Hybrid System
KX-TD816RU
KX-TD1232RU
Vol. 1

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TD816RUKX-TD1232RU

Summary of Contents for Panasonic KX-TD816RUKX-TD1232RU

  • Page 1 Digital Super Hybrid System KX-TD816RU KX-TD1232RU Added and Changed Features for Installation Manual and Programming Tables Vol. 1 Please read this manual first and then the Installation Manual. In this manual, the last letter “RU” o r “CE” of each model number is omitted. ROM Version : KX-TD816RU —...
  • Page 2 Warning Warning: Static sensitive devices are used. To protect printed circuit boards from static electricity, do not touch connectors indicated below. To discharge body static, touch ground or wear a grounding strap. Warning : Static sensitive connectors REMOTE SYSTEM INTER CONNECTION DISA DOORPHONE...

  • Page 3: Table Of Contents

    Table of Contents Added Features Section 1.4, Options 2-ISDN S0 Line Unit (KX-TD280)..................6 Section 2.4, Installation of Optional Cards and Units 2-ISDN S0 Line Unit Connection ..................6 Installing Expansion Unit (KX-TD280)................7 Section 3, Features Budget Management......................9 Calling Line Identification Restriction (CLIR) ..............
  • Page 4 Table of Contents Changed Features Section 3, Features Direct Inward System Access (DISA)................. 40 Display, Call Information ....................40, 42 Do Not Disturb (DND)......................40 DSS Console (KX-T7240 / KX-T7040)................40 Message Waiting ......................... 40, 43 Operator..........................40 Station Message Detail Recording (SMDR) ............... 40, 47 Section 4, System Programming [001] System Speed Dialing Number Set................

  • Page 5: Added Features

    Added Features...

  • Page 6: Section 1.4, Options

    Options 2-ISDN S0 Line Unit (KX-TD280) One KX-TD280 can be installed per system. D816 D816 DIGITAL SUPER HYBRID SYSTEM 2 ISDN S0 lines 2 ISDN S0 lines can be added. can be added. Installation of Optional Cards and Units 2-ISDN S0 Line Unit Connection To add two ISDN S0 lines, use the optional 2-ISDN S0 Line Unit (KX-TD280).

  • Page 7: Installing Expansion Unit (Kx-Td280)

    Installing Expansion Unit (KX-TD280) 1. Loosen two screws on the cover plate. 4. Loosen the outside screw and slide the Insert fingers into the slits to remove the cover to the right. cover plate. Slit Slit Outside screw 5. Secure the inside screw (included) to fix Note Any of the cover plates can be the cabinet to the main unit.
  • Page 8 Installing Expansion Unit (KX-TD280) 7. Insert the plug into a jack on the unit. 11. Fix the cords to the wall as shown so Connect an earth wire to the earth terminal that the front cover can be opened. on the extension expansion unit. ISDN Port No.1 ISDN...

  • Page 9: Section 3, Features

    Features udget Management Description Limits the telephone usage to a pre-assigned amount. For example, the limit may be the amount deposited at check-in of a hotel. If the pre-assigned limit is reached, the extension user cannot make further calls until he/she receives authorization from the operator.

  • Page 10: Charge Fee Reference

    Features harge Fee Reference Description Allows the pre-assigned display telephone user to view, clear charges and print out the data by SMDR. Charges are displayed per extension, CO line, account code, or the total of each can be referred to. Conditions •...

  • Page 11: Co Incoming Call Information Display

    Features O Incoming Call Information Display Description Provides the display proprietary telephone user with pre-assigned information if an incoming outside call is received. You can select one of the following by system programming. • The caller’s telephone number and name — available for an ISDN line provided with the CLIP (Calling Line Identification Presentation) feature.
  • Page 12 Features Operation Reference DPT Features, —Added and Changed CO Incoming Call Information Display Features for User Manual Vol. 1...

  • Page 13: Co Incoming Call Information Log

    Features O Incoming Call Information Log Description If the display digital proprietary telephone (KX-T7230 or KX- T7235) user cannot answer a call, the telephone automatically records the caller’s telephone number, name and the time. The user can call back the caller by checking the call log. This is available if such a telephone receives incoming outside calls from the ISDN line provided with the CLIP (Calling Line Identification Presentation) feature.

  • Page 14: Direct Dialing In (Ddi)

    Features Feature References Section 3, Features, CO Incoming Call Information Display — in this manual Operation Reference DPT Features, —User Manual CO Incoming Call Information Log Lock CO Incoming Call Information Log Mode Operator Service Features, CO Incoming Call Information Log Lock Clear irect Dialling In (DDI) Description Provides automatic direction of an incoming ISDN line call to a...

  • Page 15: Emergency Call

    Features [452]-[453] ISDN Ring Service Assignment — Day / Night — Vol. 4 [990] System Additional Information, Fields (31), (32) — Vol. 4 Feature Reference Section 3, Features Integrated Services Digital Network (ISDN) — Vol. 4 Operation References Not applicable. mergency Call Description Allows the extension user to dial out a pre-assigned emergency...

  • Page 16: Hotel Application

    Features OTEL APPLICATION Description Allows the operator to handle the front/operator services such as check-in / check-out, timed reminder (wake-up call). This operation is applicable to only the operator extension with a KX-T7235. heck-In / Check-Out Description Allows the operator to operate the check-in / check-out service. This feature can control the usage of an outside call by switching the Class of Service between primary and secondary, and count and print out the telephone charge and the other charges (such as...

  • Page 17: Timed Reminder, Remote (Wake-Up Call)

    Features Programming References Section 4, System Programming, [010] Budget Management — in this manual [011] Charge Margin Rate — in this manual [100] Flexible Numbering, Check-out ready — in this manual [124] Hotel Application — in this manual [423] Pay-Tone Assignment — in this manual [601] Class of Service —...

  • Page 18: Smdr For Timed Reminder

    Features MDR for Timed Reminder Description Station Message Detail Recording (SMDR) automatically records detailed Timed Reminder information. It is printed out when the Timed Reminder starts and the alarm is not answered. To enable the printout, refer to the program [990] “System Additional Information, Field (36),”...

  • Page 19: Emergency Dial Number Set

    Manager Programming Emergency Dial Number Set Description Assigns emergency call numbers. Selection • Emergency dial location number: 1 through 8 • Telephone number: 16 digits (max.) Default All locations – Not stored Programming Enter 009. Display:Emergency Call Press NEXT. Display:Emergency NO?→ Enter an emergency dial location number.

  • Page 20: Budget Management

    Manager Programming Budget Management Description Assigns the charge limitation of a call on an extension basis. Selection • Jack number: KX-TD816 – 01 through 16, (-1 / -2), KX-TD1232 – 01 through 64, (-1 / -2), ( =all jacks, -1 = first part, -2 = second part) •...

  • Page 21: Charge Margin Rate

    Manager Programming Charge Margin Rate Description Assigns the margin rate of a telephone charge. Selection Margin (%): 0 through 999 Default Programming Enter 011. Display: Charge Margin Press NEXT. Display: Margin: 0% Enter a charge margin rate. To delete the charge limitation, press CLEAR. Press STORE.

  • Page 22: Charge Display Selection

    System Programming Charge Display Selection Description Assigns the initial display format of charge fee on a display telephone. Selection in Meter / in Charge Default in Meter Programming Enter 120. Display: Charge Meter Press NEXT. Display example: in Meter Keep pressing SELECT until the desired selection is displayed.

  • Page 23: Assignment Of Denomination

    System Programming Assignment of Denomination Description Assigns the Denomination required for your country. Selection 2 characters (Max.) Default none Programming Enter 121. Display: Denomination Press NEXT. Display example: Denomi.: KC Enter a 0-9, , #, SELECT, CLEAR, or none. To change the current entry, press CLEAR and the new characters. To enter characters, see Section 4.1.3 “Entering Characters.”...

  • Page 24: Charge Verification Assignment

    System Programming Charge Verification Assignment Description Assigns the extension which is allowed to refer or clear for the call information on the extension, CO line, account code, and the total. Selection • Jack number: KX-TD816 – 01 through 16, ( =all jacks) KX-TD1232 –...

  • Page 25: Charge Verification Id Code Set

    System Programming Charge Verification ID Code Set Description Assigns an ID code required to refer the charge information. Selection 4 digits (0000 through 9999) Default 1234 Programming Enter 123. Display: Charge ID Code Press NEXT. Display example: Code: 1234 Enter an ID code. To delete the current entry, press CLEAR.

  • Page 26: Hotel Application

    System Programming Hotel Application Description Assigns whether the hotel application is enabled or disabled. Selection Disable / Enable Default Disable Programming Enter 124. Display: Hotel Apply Asn Press NEXT. Display example: Hotel : Disable Keep pressing SELECT until the desired selection is displayed.

  • Page 27: User Password

    System Programming User Password Description Assigns the password required for entering the User Programming mode. In the User Programming Mode, any display proprietary telephone user in the system can set the following programs: [000] Date and Time Set — Installation Manual [001] System Speed Dialing Number Set —...
  • Page 28 System Programming User Password Conditions • The password can be from four to seven digits long. Valid numbers are from 0 to 9. • If less than four digits are entered, they will not be stored. • You cannot leave the entry empty. Feature Reference Section 3, Features, —Added and Changed...

  • Page 29: Message Waiting Ring Interval Time

    Timer Programming Message Waiting Ring Interval Time Description Sets the Message Waiting ring interval time for a single line telephone. Selection Time (minutes) : 0 through 64 Default 10 min Programming Enter 216. Display: MW Ring Time Press NEXT. Display example: Interval: 10 min Enter the time.

  • Page 30: Timed Reminder Alarm Repeat Times

    Timer Programming Timed Reminder Alarm Repeat Times Description Sets the number of times Timed Reminder alarm is tried. Selection Number of times : 1 through 5 Default 3 times Programming Enter 217. Display: Alarm Times Press NEXT. Display example: Attempt:3 Enter the time.

  • Page 31: Timed Reminder Alarm Interval Time

    Timer Programming Timed Reminder Alarm Interval Time Description Sets the Timed Reminder alarm interval time. Selection Time (seconds) : 30 through 240 Default 60 sec Programming Enter 218. Display: Alarm Interval Press NEXT. Display example: Interval: 60 sec Enter the time. To change the current entry, press CLEAR and enter the new time.

  • Page 32: Co Line Name Assignment

    CO Line Programming CO Line Name Assignment Description Assigns company or customer names to each CO line so that the operator or extension user can view the destination the caller is trying to reach before answering. Selection • CO line number: KX-TD816 – 01 through 08, KX-TD1232 –...

  • Page 33: Isdn Line Number Assignment

    CO Line Programming ISDN Line Number Assignment Description Assigns your ISDN network line telephone number. Your telephone number is sent to the called party with the CLIP (Calling Line Identification Presentation) feature and to the calling party with the COLP (Connected Line Identification Presentation) feature offered by the ISDN network service.
  • Page 34 CO Line Programming ISDN Line Number Assignment • Your telephone number will be informed to the calling party if the COLR feature is disabled for the ISDN line in program [990] “System Additional Information, Field (46).” Feature References Section 3, Features CO Incoming Call Information Display —...

  • Page 35: Isdn Outgoing Clir Service Assignment

    CO Line Programming ISDN Outgoing CLIR Service Assignment Description Assigns whether ISDN CLIR (Calling Line Identification Restriction) service is enabled or disabled for outgoing outside calls. If disabled, the subscriber’s number of your system is informed to the called party. Selection •...

  • Page 36: Pay-Tone Assignment

    CO Line Programming Pay-Tone Assignment Description Enables Pay-Tone for the CO lines. Selection • CO line number: KX-TD816 – 01 through 08, ( =all CO lines) KX-TD1232 – 01 through 24, ( =all CO lines) • Enable / Disable Default All CO lines –...

  • Page 37: Smdr Output Mode

    Resource Programming SMDR Output Mode Description Assigns the SMDR Output Mode. There are two standards available – Regular and Charge. Selection Regular / Charge Default Regular Programming Enter 815. Display: SMDR Output Mode Press NEXT. Display example: SMDR:Regular Keep pressing SELECT until the desired selection is displayed.

  • Page 39: Changed Features

    Changed Features...

  • Page 40: Direct Inward System Access (Disa)

    ECTION OF EATURE ITLE EVISION ANUAL Section 3 Direct Inward System Disconnected Access (DISA) after 5 seconds. This timer can be changed to 0 second by program [990] “System Additional Information, Field (35).” This feature has become available for KX-TD816 users. Please ignore “*: Available for the KX-TD1232 only”...

  • Page 41: Dial Start Time

    ECTION OF EATURE ITLE EVISION ANUAL This program has been replaced with a new one. [100] Section 4 Flexible Numbering For details, refer to page 51. [109] Section 4 This program has been replaced with a new one. Expansion Unit Type For details, refer to page 53.

  • Page 42: Section 3, Features

    Features isplay, Call Information Description A display-type proprietary telephone shows the user the following call information: Extension number and name These are shown when calling or when called by an extension user and during an established intercom call. A display example: 123: Smith Dialed telephone number This is shown when dialing the telephone number.

  • Page 43: Message Waiting

    Features [417] CO Line Name Assignment — in this manual [423] Pay-Tone Assignment — in this manual Station Programming............User Manual Charge Fee Reference – New Rate Set Feature References Section 3, Features, Charge Fee Reference — in this manual Operation References DPT Features, —User Manual Display Call Information...

  • Page 44: Station Message Detail Recording (Smdr)

    Features Feature References Section 3, Features, Dial Tone, Distinctive — Installation Manual Voice Mail Integration — Installation Manual Operation References DPT Features, SLT Features; —Added and Changed Message Waiting Features for User Manual Vol. 1 tation Message Detail Recording (SMDR) Description Station Message Detail Recording (SMDR) automatically records detailed call information for outside calls.
  • Page 45 Features An example of a printed charge call record: When selected for charge by Program [815] “SMDR Output mode” and selected for charge display by program [120] “Charge Display Selection.” Date Time Ext CO Dial Number Duration Cost Acc code 06/24/93 10:03AM 101 01 12345678901234567890...
  • Page 46 Features Example of SMDR printout format: Explanation (1) Date : shows the date of the call as Month / Day / Year. (2) Time : shows the start time of a call as Hour:Minute / AM or PM. (3) Ext : shows the extension number, floating number, etc. that engaged in a call.

  • Page 47: Section 4, System Programming

    Features • This system can store information on up to 100 calls. If more calls are originated or received, previous records are deleted starting from the oldest one. • This data is not deleted when you reset the system. • If the system clock is not set by System Programming or if the calendar IC is out of order, the date and time is not printed out.

  • Page 48: System Speed Dialing Number Set

    Manager Programming System Speed Dialing Number Set Description Used to program the System Speed Dial numbers. These numbers are available to all extension users. There are 500 numbers, from 000 to 499. Selection • Speed dial number: 000 through 499 •...
  • Page 49 Manager Programming System Speed Dialing Number Set (contd.) – To store a pause, press PAUSE. (Refer to Section 3 “Pause Insertion, Automatic.”) – To store the feature number to convert pulse signals to DTMF signals, press the # keys. (Refer to Section 3 “Pulse to Tone Conversion.”) –...

  • Page 50: System Speed Dialing Name Set

    Manager Programming System Speed Dialing Name Set Description Assigns names to the system speed dial numbers assigned in program [001] “System Speed Dialing Number Set.” The large display telephone (KX-T7235) shows the stored name when performing System Speed Dialing. Selection •...

  • Page 51: Flexible Numbering

    For the programming sequence and more information, refer to the program [100] “Flexible Numbering” in the main Installation Manual. †: Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice Processing System (one that supports digital proprietary telephone integration; e.g. KX-TVP200).

  • Page 52: Expansion Unit Type

    System Programming Expansion Unit Type Description Assigns the type of expansion units to be used in the system. This allows the system to identify the unit in each expansion unit location. Selection KX-TD816 • Areas 1; 2 = C (4 CO) / S1 (2 S0) / S2 (6 S0) / EM(4 E&M) / E (EXT) / A (16 SLT) KX-TD1232 •...
  • Page 53 System Programming Expansion Unit Type (contd.) Keep pressing SELECT until the desired selection of Area 1 is displayed. Press to program another Area, if required. Keep pressing SELECT until the desired selection of the Area is displayed. Repeat steps 4 and 5 until all of the required entries are completed, if required.

  • Page 54: Class Of Service

    Extension Programming Class of Service Description Programs each extension for a Class of Service (COS). The COS determines the call handling abilities of an extension. Primary and secondary COS numbers can be assigned per extension. Selection • Jack number : KX-TD816 – 01 through 16, (-1 / -2), KX-TD1232 –...
  • Page 55 Extension Programming Class of Service (contd.) Conditions • There is a maximum of eight Classes of Services. Every extension must be assigned to a Class of Service and is subject to the COS Programming of programs [500] through [508] and [991]. The restriction of program [991], field 1, applies only for analog outside lines.

  • Page 56: Deleted Features

    Deleted Features EATURE ITLE ECTION OF THE ANUAL 3 Features Caller ID [110] Caller ID Code Set 4.3 System Programming 4.3 System Programming [111] Caller ID Name Set 4.5 CO Line Programming [406] Caller ID Assignment...

  • Page 57: Programming Tables

    Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 58 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 59 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 60 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 61 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 62 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 63 Programming Tables [001] - [002] System Speed Dialing Number / Name Set Parameter for [001]: Parameter for [002]: Item : Telephone number Name Item : Parameter for [001]: Parameter for [002]: SPD No (24 digits max.) (10 characters max.) Telephone number SPD No Name All : Not stored...
  • Page 64 Programming Tables [010] Budget Management Item : Item : Item : Jack No. Jack No. Jack No. Charge Limitation Charge Limitation Charge Limitation (01-21)-1 (45-64)-1 (22-44)-1 Default: all 22-1 44-1 all jacks 22-2 44-2 01-1 23-1 45-1 01-2 23-2 45-2 02-1 24-1 46-1...
  • Page 65 Programming Tables [100] Flexible Numbering [009] Emergency Dial Number Set Feature Default Parameter Parameter : 16 digits max., Item : consisting of 0 – 9 Location — Reserved Default : all - Not Stored — Emergency call 1 ghrough 8 55-62 Timed reminder, remote CO incoming call information log mode...
  • Page 66 Programming Tables [109] Expansion Unit Type Area No. TD816 Selection S1 S2 EM E A C S1 S2 EM E A Default Parameter Master System TD1232 Area No. Selection C S1 S2 EM E1 E2 A1 A2 C S1 S2 EM E1 E2 A1 A2 S3 C S1 S2 EM E1 E2 A1 A2 Default Parameter...
  • Page 67 Programming Tables [123] Charge Verification ID Code [122] Charge Verification Assignment Item : Item : Selection Selection Jack No. Jack No. Parameter: 4 digits Default Enable Disable Disable Enable (01 – 31) (32 – 64) (0000 through 9999) Default: all all jacks [124] Hotel Application Default...
  • Page 68 Programming Tables [418] ISDN Line [418] ISDN Line [417] CO Line Name [417] CO Line Name Assignment Assignment Number Assignment Number Assignment CO Line Parameter : Name Parameter : Telephone CO Line Parameter : Name Parameter : Telephone (10 characters max.) (10 characters max.) No.
  • Page 69 Programming Tables [815] SMDR Output Mode [423] Default Selection Pay-Tone Assignment Regular Charge Item : Selection CO Line No. Enable Disable Default : all all CO Lines...
  • Page 70 Programming Tables [601] Class of Service Parameter : Primary / Parameter : Primary / Parameter : Primary / Item : Item : Item : Jack No. Jack No. Secondary COS no.(1-8) Jack No. Secondary COS no.(1-8) Secondary COS no.(1-8) (01-22)-1 (45-64)-1 (22-44)-1 Primary...
  • Page 72 Matsushita Electric of Industrial Co., Ltd. Central P.O. Box 288, Osaka 530-91, Japan Printed in Japan PSQX1784ZA KS0599MM 0...

Table of Contents