Assembly Tools - Currie tech eZip TRICRUISER Assembly Manual

Assembly Tools

Included in your parts box:
• Pedals
• Quick release skewer
• Reflectors (if not already installed)
• Toolkit (4+5mm combo Allen wrench,
13+15mm combo open-end wrench)
Assembly will take 1 - 2 hours
Note:
When working on your tricycle as instructed by this guide, please refer to the torque values chart (Pages 18 and 19) for detailed torque require-
ments. Under- or over-tightened components may loosen or break, causing a fall.
Steps in this guide that call for the use of bicycle grease do so in the interest of keeping your tricycle in working condition for as long as possible. Grease
is not absolutely vital to the assembly of this product, but failure to apply it as directed could cause parts to seize over time and irreparably damage the
frame or components.
Because tricycle parts tend to be greasy, it is recommended that you lay down a tarp or sheet to protect your floor if assembling the trike indoors.
It is best to remove the protective packaging during the assembly process only as needed, leaving some intact to protect the trike during assembly.
During assembly it may be helpful to reference the photos on the cover of this guide if you are unsure of any steps.
Please take the time to read the battery care and storage section of your manual for useful information on prolonging the life of your battery.
2
Currie Technologies
Technical and Customer Service
Helpful Tools:
• Scissors (for cutting zip-ties)
• Bicycle grease
• Phillips-head screwdriver
• Allen wrenches: 4, 5, & 6mm
• Open-end wrenches: 9, 10, 14, 15, & 17mm
or adjustable crescent wrench
• Needle-nose pliers
1-800-377-4532