Step 7 Replace The Freezer Drawer; Step 8. Leven The Freezer Drawer - Monogram ZWE23E series Installation Instructions Manual

STEP 7 REPLACE THE FREEZER
DRAWER
ATTACH AND SECURE THE DRAWER FRONT
TO THE SLIDES
A. Pull the slide Mechanism to full extension using both
hands simultaneously.
B. Remove the basket resting on the slides.
CAUTION
Lifting Hazard
Freezer door is heavy Use both hands to secure
the door before lifting.
ATTENTION
Avertissement de porte
lourde.
La porte du compartiment congélateur est lourde.
Utilisez les deux mains pour stabiliser la porte avant
de la soulever.
PRECAUCIÓN
Riesgo al levantar la puerta
La puerta del freezer es pesada. Use ambas manos
para asegurar la puerta antes de levantar la misma.
C. Lift the freezer door and place it on the slide
mechanism
D. Replace the attachment screws and torque the
screws to 65 in-lb
E. Adjust freezer door gap if necessary.
Installation Instructions
Align and insert tab on
freezer door bracket
into slot on freezer slide
bracket.
STEP 8 LEVEL THE FREEZER
DRAWER
Locate the height adjuster cam in the freezer
A.
door. Slightly loosen the three door attachment
screws on both sides using a 3/8" hex socket
driver.
Locate and loosen the cam screw using the
B.
T-27 screw driver.
Cam
Screw
Lift the door on the side requiring adjust-
C.
ment, rotate the cam to required position.
0 - Initial position
1 - Lift by 0.050"
-1 - Lower by 0.050"
-2 - Lower by 0.100
-3 - Lower by 0.150"
After adjustment tighten the 3 attachment
D.
screws using to 65 in-lb.
11