Ricoh PE-P4 Field Service Manual page 135

Horiz. Tray1
Vert.Tray1
Horiz.Tray2
Vert.Tray2
Registration
Horiz Bypass Tray
Vert Bypass Tray
Horiz.Dup Back
Vert.Dup Back
Adjusts the horizontal registration for tray 1. If the
machine settings are reset to the factory defaults, this
value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for tray 1. If the machine
settings are reset to the factory defaults, this value does
not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the horizontal registration for tray 2. If the
machine settings are reset to the factory defaults, this
value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for tray 2. If the machine
settings are reset to the factory defaults, this value does
not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the horizontal registration for the bypass tray. If
the machine settings are reset to the factory defaults, this
value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for the bypass tray. If the
machine settings are reset to the factory defaults, this
value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the horizontal registration for the back side in
duplex mode. If the machine settings are reset to the
factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Adjusts the vertical registration for the back side in duplex
mode. If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 1 mm/step]
Service Menu
133