Auto Convergence - LG RL-44NB10RB Service Manual

Sub-Bright Adjustment(Option)
O
1) Tune the TV set to receive a EU 05 CH.
2) Enter WB mode by pressing the IN_START & '4' button.
Adjust S-BRI data until 100% and 80% GRAY PATTERN is
classified.
F G D E
(Use , , , , OK buttons)
100% and 80% GRAY PATTERN
SUB BRIGHT Adjustment Signal
Auto-Convergence Check (option)
O
1) Check the Auto-Convergence in PAL/NTSC mode
separating.
2) Press the IN_START key on R/C for adjustment and press
the Time key to check whether Auto-Convergence works
normally in each mode.
3) If not,check the Convergence condition or Measuring
condition and SENSOR condition.
4)The shipment must be done after restoring the final auto
convergence data value.
(Restore a Convergence data : IN_START -> '3' -> TEXT)
Check the Option Adjustment
O
1) Check the OPTION1~5 data of attach 6 is well recorded.
2) The option value of each suffix is started on JOB EXP of
3141VMN chassis Assy.
Fifth Vertical Line
- 17 -