Samsung SCX-4216F Service Manual page 54

Disassembly and Reassembly
5-11 SMPS
1. Before you remove the SMPS, you should remove:
- Rear Cover (see page 5-2)
- Side Cover(LH, RH) (see page 5-3)
- Scanner Ass'y (see page 5-5)
- Engine Shield Ass'y(see page 5-12)
2. Remove the three screws securing the Inlet Bracket
and remove it
Inlet Bracket
2. Unplug the one connector and remove the one screw
securing the Engine Shield.
Service Manual
5-14
4. Remove the three screws securing the SMPS. Then
lift the SMPS out, as shown below.
SMPS
Samsung Electronics