Precautions when Using the USB Models
This section explains the usage precautions when using a USB connection (self powered and bus powered).
When using the DM-D110 Virtual COM Port Driver, set the communication speed for the dip
switch to 115200 bps.
Before putting Windows to system standby status, Release/Close this product.
In the following situations, Release this product and the Claim again.
When putting Windows to system standby status and then restarting.
When you have turned off this product and turned it again on while application is still run-
ning.
While the application software is running, do not remove the USB cable for this product.
Do not share this product from multiple application software.
Precautions when using the serial (USB controlled)
Make sure you turn on the customer display first, and then turn on the TM printer. Otherwise the TM printer
cannot recognize the customer display.
78
Precautions
Controlled
environment
✔
✔
✔
-
✔
✔
✔
-
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔