Setting Method - Epson DM-D210 Technical Reference Manual

Setting method

Do not remove the DIP switch cover until after turning the power off. Removing the cover while
the power is turned on may damage the device.
1
Turn off the power of the this product and system, and remove cable.
2
Remove the DIP switch cover.
DM-D110
ON
1 2 3 4 5 6 7 8 9 10
DIP Switch Cover
3
Change each setting of the switches
Refer to "DIP Switch 1 Functions" on page 28
4
Close the DIP switch, Turn on the power of the this product and system.
DM-D210
8
for the function of DIP switch.
Chapter 2 Setup
2
9 10
27