Epson DM-D210 Technical Reference Manual page 33

3
Connect the cable to DP-110, computer, and TM printer to match the constructed
environment. (See
4
Arrange the cables as shown below. Put the cables inside the DP-110.
For the RS-232/USB model, the end of the connector of the unused cable should be
capped, and then bundled to be stored inside DP-110.
5
Attach the base plate to the DP-110 following the numbered arrows shown below.
Then push the base plate until it is locked by the hook on the DP-110.
The plate is locked 
by the hook.
When the extension support (DP-105) is used, attach affixing tapes to the four 
6
corners of the plate to keep the unit from falling down.
7
When using the AC adapter, insert the power cord to the AC adapter, and then insert
the power cord to the outlet.
"Connecting" on page 63)
Chapter 2 Setup
2
33