32
HIGH. Higher sensitivity causes a faster response to the
motion.
AREA
There can be 4 surveillance areas set for motion detection.
Select an area and follow the steps below to set the area
for motion detection.
Figure 1-22 Setting a Detection Area
Steps:
Set the STATUS as ON to enable the motion detection area.
1.
2. Move the cursor to COLOR, and select a color for the area's
border.
3. Move the cursor to HORIZON SIZE and move the joystick
left/right to define the horizontal size of the selected motion
area.
4. Move the cursor to VERTICAL SIZE and move the joystick
left/right to define the vertical size of the selected area.
HD262H(X) Minidome Camera User Guide
AREA
1. STATUS
2. COLOR
3. HORIZON SIZE
4. VERTICAL SIZE
5. HORIZON MOVE
6. VERTICAL MOVE
7. RETURN
OFF
WHITE
0
0
0
0
800-18622 – A – 07/2014