Extracting Ai (Application Identifier)-Prefixed Strings - Denso AT30Q-SM User Manual

7.2.1.3 Extracting AI (Application Identifier)-prefixed strings

If the scanner reads any of GS1-128, GS1 DataBar, and Composite (excluding linear components in GS1 Composite), it edits
the data according to AI (Application ID) and outputs it in the data transmission format selected in the scanner (see Section
9.4).
The "AI-prefixed string" extraction is available in two modes--AI-delimited mode and AI parenthesizing mode. AIs to be used
for data editing are listed in (3) AI table later.
(1) AI Split Mode
In this mode, the scanner extracts strings prefixed with AIs specified (up to three types of AIs) and separates them with the
specified delimiters (selectable from headers/terminators, commas and tabs) instead of AIs to output them.

Setting options
If the scanner fails to extract an AI-prefixed string when the "Data transfer regardless of error result" is permitted, it outputs
the data read as is without editing.

Delimiters
 Header/Terminator
Specifying a header/terminator as delimiters prefixes a header and suffixes a terminator to each element string separated.
A scanner ID, code ID mark, the number of digits, prefix, and suffix can be also added to each element string if their
transmissions are enabled.
The number of digits is the count of each element string edited.
Example: Data read: (01)94901234567894(11)030808(13)030810
Header: STX; Terminator: ETX; Scanner ID: Prohibited; Code mark: Prohibited; Number of digits: Prohibited;
Prefix/Suffix : Not specified; BCC: Prohibited
Specified AI
01,11,13
 Comma-delimited format
Specifying a comma as delimiters outputs comma-delimited data. No comma follows the tail of the data.
A header and terminator are added to the full string. None of a scanner ID, code ID mark, the number of digits, prefix,
and suffix is added even if their transmissions are enabled.
Example: Data read: (01)94901234567894(11)030808(13)030810
Header: STX; Terminator: ETX; Scanner ID: Prohibited; Code mark: Prohibited; Number of digits: Prohibited;
Prefix/Suffix : Not specified; BCC: Prohibited
Specified AI
01,11,13
Item
"Data transfer regardless of error result"
[STX]001494901234567894[ETX][STX]0006030808[ETX][STX]0006030810[ETX]
Transmitted Data
[STX]94901234567894,030808,030810[ETX]
Options
Enabled/Disabled
Transmitted Data
20