Connecting external devices
USB port with charging function (USB Type-C
USBportwithchargingfunction (USBType-C™)
At this USB port, you can charge a connected USB device or operate devices without
an additional power supply (e.g. a monitor or printer).
This is also possible with the notebook switched off, if the USB Type-C Power Delivery
on System-Off function is activated in the Advanced - Miscellaneous Configurations menu
of the BIOS Setup Utility. Calling up and using the BIOS Setup Utility is described
in section
"Settings in BIOS Setup Utility", Page
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
Additional information can be found in the documentation for the USB devices.
USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps.
USB 3.1 Gen 2 has a data transfer rate of up to 10 Gbps.
74
+
86.
► Connect the data cable to the
external device.
► Connect the data cable to a USB port
(USB Type-C
™
™
)
) on the notebook.
Fujitsu