Password Protection For Booting The Operating System - Fujitsu Lifebook T937 Operating Manual

Security functions
Changing the supervisor password or user password
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the supervisor password.
User password Supervisorpassword Password
► Start the BIOS Setup Utility and go to the Security menu.
► When changing the password, proceed exactly as when assigning a password.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
User password Supervisorpassword Password
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and press the
You will be requested to enter the current password by the Enter Current Password prompt.
Enter New Password will appear and you will be requested to enter a new password.
► Press the Enter
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the
The notebook will now reboot with the password removed.
With the supervisor password, you simultaneously deactivate the user password.

Password protection for booting the operating system

With the supervisor password you have set in the BIOS Setup Utility (see
section
also prevent booting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the
► Select the option you require (Disabled, First Boot or Every Boot) and press the
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the
► Select the Disabled option and press the
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
68
key twice at this request.
key.
Enter
"Assigning the supervisor and user passwords", Page
Enter key.
Enter key.
Enter key.
key.
Enter
67), you can
Enter key
Fujitsu