Sony MVS-6500 System Startup Manual page 52

KEY ADJ button
M/E1 button
LUM button
Key source (assigned in signal pair) for title video
4
Insert the key.
a Check the post-insertion video on the monitor
assigned beforehand for key preview output.
b Press the [KEY1 ON] button in the transition
control block.
Memo
To insert the key using an auto transition, press the
[KEY1 TRANS] button.
KEY1 ON button
KEY1 TRANS button
Transition control block
52
Inserting Titles (Keys)
KEY1 button
AUTO SEL button
Flexi Pad
5
Insert keys 2 to 4.
a Press the [KEY2] button, turning it on.
b Repeat steps 3 and 4 to insert key 2.
c Set key 3 and key 4, as required.
Flexi Pad
Key 2
6
Change the key display priority.
a In the transition control block, press the [KEY
PRIOR] button, turning it off.
b Holding down the [PRIOR SET] button, press the
[KEY1] button.
KEY2 button
Key 1