Table of Contents
Advertisement
DME wipe
The video changes in a DME wipe pattern that uses image shrinking/magnification or other DME effects.
Background A
Names of Parts in the Control Panel
The positions of the principal parts and fader lever used in the following description are shown in the following figure.
2nd row
1st row
M/E bank
PGM/PST
bank
2nd row
1st row
Video Transitions using Cuts
In a cut, the video changes with the single press of a button.
(The following describes the M/E bank, as an example.)
1
Push the fader level up.
(The background A video is displayed on the whole
screen.)
Transition control block
44
Video Switching (Transitions)
Cross-point control block
Fader lever
Transition control block
Fader lever
2
Select the video you want to display first.
a In the background A row of the cross-point control
block, press the cross-point button assigned with
the selected video.
Background A row
Lit buttons
Background B row
Cross-point control block
Background B
Flexi Pad
Advertisement
Table of Contents
