Kalorik TKG HA 1006 Manual page 14

Fax +32 2 359 95 50

The appliance is designed for the preparation of small quantities of food, which have to

be consumed rather quickly. It is not designed for the preparation of large quantities at
once.
Never touch the blades or other accessories when the appliance is in use. Furthermore,

never try to stop the movement of the accessories in any way whatsoever.
Always use the pusher to push food down the funnel of the bowl lid. Never use your fingers,

or any utensil.
Never block the safety device of the appliance.

The processor bowl can simply be washed under running water.

Be careful not to hurt yourself when handling, removing, cleaning or emptying the bowl.

(*) Competent qualified electrician: after-sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In case of need you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not designed for professional use. You should follow the requested breaks.
Failure to follow this instruction carefully may result in damage to the motor. Please refer to the
rating label for the maximum continuous usage time (KB xx min in which xx is the maximum
usage time). The breaks should last at least 10 minutes. Any wrong use will invalidate the
guarantee.
USE
To use the processor bowl (10), the safety lid (20) must be locked into place (fig. 1, page 6).
Make sure the appliance is unplugged and the ON/OFF & speed switch (6) is on "0" position.
 Place the processor bowl (10) onto the shaft (9) (fig. 2, page 6) and turn it clockwise until
the handle reaches the switch connector (8) (fig. 3, page 6).
Make sure the bowl is well fitted, if not, the connector switch (8) will not be engaged and

the appliance will not work.
 Depending on the desired preparation, you will have to use various accessories. For more
details, please check the instructions below.
 Place the lid with feeding tube (11) on the bowl and turn it clockwise until the line on the
lid ends up in front of the left arrow of the bowl. Caution: as long as the lid is not locked
properly, the appliance will not work.
 Plug in the appliance.
 Turn the ON/OFF & speed switch (6) up to a speed between 1 and 4 depending on
preparations.
 If you wish to use the appliance punctually, turn the ON/OFF & speed switch (6) to "0" and
press the pulse button (5).
FUNCTIONS
a) Chopping
 Make sure the appliance is unplugged, that the ON/OFF & speed switch (6) is in "0"
position and that the safety lid (20) is closed.
 Place the processor bowl (10) onto the shaft (fig. 2, page 6) and turn it clockwise until the
handle reaches the switch connector (8) (fig. 3, page 6).
 For chopping, place the blade support (18) onto the shaft (9) (fig. 4, page 6) and put the
chopping blade (17) on the support (18) (fig. 5, page 6).
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
14
Assembly page 14/64
special instruction from
TKG HA 1006 - 140710
Team