Wear Data - Mitsubishi C70 Instruction Manual

2. CNC Monitor Screen

2.3.1 Wear Data

The TOOL TIP OFFSET screen will appear when the menu [T-OFFSET] is pressed.
Set the nose wear for each tool used. When the tool compensation No. is designated by the tool command (T
command), compensation is carried out matching the tool length of the next screen.
(Refer to "2.3 (II). Tool Offset (M system)" for Machining center system)
I - 40
2.3(I) Tool Offset (L system)
X axis offset
X axis tool length offset + X axis
wear offset
Z axis offset
Z axis tool length offset + Z axis
wear offset
C axis offset (additional axis)
C axis tool length offset + C axis
wear offset
Data Function
X X axis tool nose wear
compensation
Z Z axis tool nose wear
compensation
Additional axis tool nose
C
wear compensation