7. Data Backup and Restoration
7.2.2 Data Restoration
Backup / Restoration function is installed on GOT1000 series.
The backup data can be restored to each CPU module one by one in easy operation.
USB memory can be used on GOT1000 series GT16.
To exchange the CNC CPU unit, initialize the internal data. Refer to "C70 Setup Manual" for how to initialize.
(Note)
The zero point of rotary axis will disappear after replacing the CNC CPU unit. Repeat the zero point
initialization.
CF card
USB memory
(
)
CNC CPU
Q173NCCPU
QnUD(E)CPU
PLC CPU
QnUD(E)HCPU
M E L S E C
M E L S E C
MITSUBISHI
MITSUBISHI
III - 70
7.2 PLC/CNC CPU Data Backup and Restoration
GOT1000 Series
(SVGA / XGA)
POWER
POWER