See Figs.6 And - JVC KD-S847 Service Manual

QQ
3 7 63 1515 0
2.1.3 Removing the heat sink
(See Fig.5)
(1) Remove the two screws B and one screws C on the left
side of the main body.
2.1.4 Removing the bottom cover

(See Figs.6 and 7)

• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the main body, and release the two joints d, two
joints e and joint f.
CAUTION:
Do not damage the main board when releasing the joint f using
a screwdriver. (See Figs.6 and 7)
TE
L 13942296513
2.1.5 Removing the rear bracket
(See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws D, three screws E and two
screws F on the back side of the main body.
(2) Remove the rear bracket.
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
D
Joint d
Joint f
Q Q
3 6 7 1 3 1 5
Bottom cover
Joint d
E
co
D
.
9 4 2 8
C
Heat sink
Fig.5
Bottom cover
Joint e
0 5 8 2 9 9 4 2 8
Fig.6
Joint e
Joint f
Fig.7
Rear bracket
m
E
Fig.8
(No.49832)1-5
KD-S847
9 9
9 9
F
D