See Also "Changing The General Settings (Psm); Press And Hold Sel (Select) For More Than; Seconds So That One Of The Psm Items Appears On The Display - JVC KD-LH401 Service Manual

What is ImageLink?
When an MP3 or a WMA folder includes an
image <jml> file edited by Image Converter
(supplied in the CD-ROM), you can show the
image on the display while the tracks in the
folder are played back.
• While reading an image <jml> file, no
sounds come out ("Image Link" is shown on
the display during this period).
If there are more than one <jml> file in a
folder, a <jml> file with younger playback
order number will be shown on the display
(in the above example, "Photo2.jml" will be
used for Album 2).
To activate ImageLink, follow the procedure
below:
• See also "Changing the general settings
(PSM)" on page 45.
1

Press and hold SEL (select) for more than

2 seconds so that one of the PSM items
appears on the display.
2
Press number button 1 to select "MOVIE"—
Movie category of the PSM settings.
The "Graphics" setting screen appears on
the display.
3
Turn the control dial to select "ImageLink."
4
Press SEL (select) to finish the setting.
ImageLink starts functioning when the next
folder starts playing.
Note:
ImageLink will not work in the following cases:
• If no <jml> file is included in an MP3/WMA
folder.
• If Intro Scan is activated.
• If the source is changed to any other than "CD," or
• If you turn off then on the unit while "Image Link"
is shown on the display.
25