Advertisement
Mounting Monitor Bracket to a television with a flat back
Note: For televisions with a curved back or recessed back proceed directly to step #19.
16. Determine the correct diameter of the bolt your TV requires by hand threading them into the
threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If
you are unable to find the correct bolt consult a local hardware store.
17. Once you have determined the correct diameter Bolt, follow the appropriate Diagram below,
thread the Short Bolt through the appropriate Lock Washer, Flat Washer, the Monitor Bracket
(K), and into the upper threaded inserts of TV. As shown in detail #8A.
against a wall or other solid surface when attaching with the Monitor Brackets (K). DO NOT
place the TV face down on the glass this may cause permanent damage.
18. Proceed to insert the long Bolt through the appropriate Lock Washer, the Flat Washer, the slot
of Monitor Bracket (K), a second Flat Washer (M4/M5 Diameter Bolts only), appropriate
Spacer, and into the bottom threaded inserts of TV. As shown in detail #8. Make sure the
Monitor Brackets (K) are centered and level with each other. Tighten the bolts securing the
Monitor Brackets to the TV.
Parts provided
K – Monitor Bracket
TV Mounting Kit
Please call for replacement parts or assistance:
Whalen Furniture Mfg. Inc.
Qty.
Tools required
(2)
Phillips Screwdriver
1-866-942-5362 (valid only in USA)
Page 12
Model # SMXL-6
Note: Lean the TV up
Factory No. 56-12089
Advertisement
