Network Setup; System Setup - A SYSTEMS AV200HD User Manual

Network Setup

Recording Setup

System Setup

HDCP ON / OFF
1. Press "ENTER" or → to Format select and from
bottom menu select the format type. (Default: H.264)
2. DHCP: Enable or disable DHCP.
3. Manual IP Setup for LAN video streaming.
4. Adjust the audio fader for audio level (Default: 75%);
press speaker icon to mute the audio output.
Mute
●
1. Press "ENTER" and use the "SEL Knob" to turn
HDCP On and Off.
When HDCP is not turned on, HDCP encrypted video
sources will not be allowed to pass through PGM.
*NOTE1: During streaming and recording, PGM
content is HDCP encrypted and SDI output is disabled.
*NOTE2: When HDCP is already enabled and user
attempts to connect other HDCP devices into an HDMI
ports that was previously unoccupied, please turn
the HDCP function off and then on again to decode
the signal. Otherwise, it will be able to display in the
multiview screen. User must do this for all HDCP
devices, unless devices were connected to AV200HD
first and then turn on the HDCP function.
53
AV200HD
Active
●
English