Precaution For Use - A SYSTEMS AV200HD User Manual

AV200HD

PRECAUTION FOR USE

Handle carefully
●
Do not drop the product, or subject it to strong shock or vibration.
Do not carry or move the product by the T-Bar (fader lever). This is important to prevent trouble.
Use the product in an ambient temperature of 32 °F to 95 °F (0 °C to 35 °C)
●
Avoid using the product at a cold place below 32 °F (0 °C) or at a hot place above 95 °F (35 °C). Extremely temperatures
will adversely affect the delicate parts of the unit. Room temperature of 77°F ± 5° (25°C ± 5°) is recommended
operation temperature.
Power off before connecting or disconnecting cables
●
Be sure to switch the power off before plugging or unplugging the cables.
Avoid humidity and dust
●
Avoid using the product at a humid or dusty condition because much humidity and dust will cause damage to the parts
inside the unit.
Maintenance
●
Clean the product using a dry cloth. To remove stubborn dirt, dip a cloth into a diluted solution of kitchen detergent,
wring it out well, and wipe the product gently. After wiping the product with a moist cloth, wipe it again with a dry cloth.
Caution
Avoid using benzene, paint thinners and other volatile fluids.
●
If a cleaning chemical is to be used, carefully read through the precautions for its use.
●
Precaution to be observed during production
●
This product's image switching and image effect functions can be used to produce images which flicker rapidly or
images which change rapidly.
However, bear in mind when using these functions in production that the kinds of images produced may have an
adverse effect on the viewer's physical well-being.
Handling the optional boards
●
Be absolutely sure to turn off the power of the product before installing or removing any of the optional boards.
Beware of sharp or pointy edges and metal parts of the boards when installing or removing the optional boards.
When the product is to be discarded
●
When the product is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly
in order to protect the environment.
Concerning the consumable parts
●
Cooling fan: This is a consumable part. As a general rule, replace it after about 30,000 hours of operation.
Power supply unit: This is a consumable part. As a general rule, replace it every 5 years or so (when the unit has been
operated for 15 hours a day).
The period when the consumable parts need to be replaced will differ depending on the operating conditions.
Ask your local dealer for the replacement service.
English
6