en
ID Selection Mode
If the auto-recognition function discovers multiple possible candidates, the device
automatically switches to ID selection mode after body composition measurement.
(The device beeps)
Select your ID number using the
If you notice that your ID number is incorrect while you are viewing your results,
press
for 3 seconds or more to switch to the ID select mode and re-select your
ID.
Note:
・If you turn off the power without re-selecting your ID number, those measurement results are saved to the incorrect ID number.
・The backlight color changes depending on the registered ID.
1.Blue
2.Pink
Measurement In Progress
The monitor and the control panel light up depending on the area being measured.
This is a useful indication of the progress of the current measurement.
16
and
buttons, then press
3.White
4.Sky Blue
to confirm.
Guest: Purple
Ex: Measuring the right side of the body