Table of Contents
Advertisement
2D BARCODE READER (OPTION)
The 2D Barcode Reader is primarily controlled by the client application and a special software driver
Therefore, please refer to your application specialist or supervisor for further instructions
Information below are basic scanning instructions
Testing the 2D Barcode Reader
1
To test the reader, click on:
Start > Program > DAP Utilities >
CE Pad
2
Point the top
(a)
of the unit toward the
barcode label needed to be read Hold the unit
steadily at a distance of 10 cm (4 in), from the
barcode
3
To activate reader, press the
The 2D Barcode Reader will emit a red beam
allowing the user to adequately focus on the
barcode needing to be read
Once the reading has been completed, the
device will emit a sound The numeric code will
then be displayed on the screen
You can release the trigger at any time to
cancel the reading
WARNING
Do not move the unit while reading or unit will not
be able to read barcode
Unlike the laser scanner, the 2D reader does not
"swipe" the barcode, but rather, it takes a reading
much like a "photograph" which is then recognized
and interpreted by the unit Reading a barcode can
be taken from any angle
www.jpwassociates.com
Operation Guide
trigger button
DAP-000140
facility.
Trigger Button
a
19
Advertisement
Table of Contents
