Table of Contents
Advertisement
TOUCH SCREEN CALIBRATION
1
Hold your Stylus down until the Cross begins
to move
2
Touch the center of the Cross for a
few seconds Repeat operation as
Cross moves to another location
To access the Touch Screen Calibration Menu,
1
Click on: Start > Settings > Control Panel
2
Select Stylus Applet
3
Click on Calibration Tab and click on Recalibrate
WARNING
Apply normal pressure when using the Touch Screen
Excessive pressure may permanently damage the screen
and hinder performance
PANNING THE SCREEN
Due to the smaller screen size, from time to time part of a displayed window may not be visible
By pressing the combination of Blue key and the Directional key Up/Down or Left/Right, you will be able to
navigate (pan) to view the entire window
Move Window Left
www.jpwassociates.com
Operation Guide
+
Move Window Up
Move Window Down
DAP-000140
Move Window Right
15
Advertisement
Table of Contents
