TURNING THE UNIT ON (RESUME)
Press the ON button for 2 to 3 seconds
is started
Note:
•
Do not continue pressing the ON button once
the unit has started to resume
WARNING
If the battery power level is very low, it may not be possible
to turn the unit on Ensure battery is fully charged
TURNING THE UNIT OFF (SUSPEND)
They are different ways to turn the unit off (suspend-it)
In Suspend Mode the unit will save the exact status of your application program and data Simply restart the
unit when ready to resume your task where you left off
With fully charged batteries, the unit can be stored up to several weeks without re-charging
Automatic Suspend
If the unit remains inactive for a certain time, it will turn off automatically in order to save battery The delay
delay is 3 minutes
SUSPEND Unit Manually
Click on the Start Button located at the bottom left corner of your screen
and then click Click Suspend
Alternatively, press the blue key followed by the ON/OFF key; one after
the other
+
14
Operation Guide
DAP-000140
Schemes) The default
www.jpwassociates.com