Charging The Battery - DAP Technologies CE3000B Series User Manual

Agile performer handheld mobile computer
Hide thumbs Also See for CE3000B Series:
Table of Contents

Advertisement

CHARGING THE BATTERY

From the main unit and cradle
While charging the Status LED Indicator will turn red in the next 5 seconds indicating that charging is now
in progress The light will turn green when charging is complete See Quick Tour section for details on the
Status Indicator
Charging may take up to 4 hours If the battery was completely discharged it could take some time before
the Status LED Indicator lights-on (few seconds to 3 minutes) Processing will resume exactly where it was
interrupted once re-charging starts unless the unit went in Battery Expired Mode In that mode the battery
has lost its power and the unit will reset
CSCE301-NA (North America 110 Vac)
CSCE301-EU (Europe 220 Vac)
CSCE301-UK (UK 220 Vac)
WARNING
To preserve battery integrity, recharging must only take place when the battery is at a temperature between
+5°C (41°F) to + 45°C (113°F) The battery status indicator glows yellow if the battery is too hot or too cold to
be charged and the c harging system is disabled
Never recharge the unit with the battery removed The unit may reset and can potentially corrupt any unsaved
data
10
Operation Guide
DAP-000140
www.jpwassociates.com

Advertisement

Table of Contents
loading

Table of Contents