Charging Battery - SoftBank 830CA User Manual

Battery & Charger

Charging Battery

1
Using AC Charger
Use only SoftBank-specified AC Charger ZTDAA1 (sold
separately). In this guide, ZTDAA1 is referred to as "AC
Charger".
Plug
AC Outlet
External Device Port
Plug
AC Charger
1
Open Port Cover
See P. 1-13 for instructions.
2
Insert Connector into External Device Port
1
-14
Port Cover
Release
Tabs
Connector
3
Plug AC Charger into an AC Outlet
Charging Indicator lights while charging. When
charging finishes, Charging Indicator goes out.
4
Disconnect Connector from handset
Press and hold Release Tabs to remove Connector.
5
Close Port Cover
6
Unplug AC Charger from AC Outlet
Note
Battery can only be charged while inserted in handset.
･
If Charging Indicator/Display Indicator
･
unusual Stop charge appears, disconnect handset from AC
Charger and remove battery. Set up handset and Charger and
start charging again. If the same error occurs, AC Charger may
be faulty. Contact SoftBank Customer Center, Customer
Assistance (P. 14-48).
More Features
Customize
Backlight
Set Backlight during Charging
go out and Charge
☛
( P. 13-7)