SoftBank 830CA User Manual page 292

Troubleshooting
Problem Possible Cause & Remedy
A message The image or video is unavailable
appears instead with the function being used
of an image or when any of the following
video. messages appears.
Not available, Expiredfile and
No preview data
appears The image file may be corrupted.
instead of an
image or
preview.
The Flash Is Keypad Lock active?
clock shown in
Standby is
stopped.
The Flash If t or y
shown in wallpaper Flash is running it will
Standby is pause.
paused. Press again or shortly wait for
t
it to run again.
Images shot When shooting images indoors,
with handset flicker may occur due to
camera flicker. fluorescent lighting, etc.
Changing the Flicker setting may
help reduce flicker.
Refer to
-
-
P. 4-4
are pressed while a -
P. 13-32
Problem Possible Cause & Remedy
Still images or Were the still images or videos
videos shot with shot with Flicker not set to
handset camera
Auto?
are too bright. Set Flicker to Auto.
Still images or Select a Photo Mode suited to the
videos shot with subject or scene.
handset camera
are blurred.
Cannot watch Is handset out of the digital
TV. terrestrial broadcast service area
or in a location with a weak
signal?
Are the channel settings done?
USIM Card is not properly inserted
Insert USIM
appears. or may be damaged.
Memory card is not properly
Insert microSD
appears. inserted or may be damaged.
Perform a scan disk on memory
Replace with a
card.
new one or
check the disk
appears.
Refer to
P. 13-32
P. 7-12
-
P. 8-4
P. 1-10
P. 11-10
P. 11-17
14
14
-9