Samsung VP-D371 Service Manual page 16

Alignment and Adjustments
5) How to set up the camera adjustment mode
[STEP 1]
ΠConnect the Power source.
´ Set the Power Switch to "CAM" position and Mode Switch to "TAPE" position.
[STEP 2]
ΠPress and hold the "Display+OK" buttons on the video camera at the same time for more than
5 seconds.
´ When monitor OSD appears as shown Fig. 3-5, the adjustment mode has been activated successfully.
ˇ Press the "T( ) orW( )" to highlight CAM ADJ and push the "OK Button".
¨ Monitor OSD shows Fig. 3-6. Then Camera adjustment mode has been activated successfully.
[STEP 3]
If you want to finish the adjustment mode, you have to do Power Reset.The Power Reset means that you
pull out the power source and pull in it again.
3-4
Fig. 3-4
Fig. 3-5
Samsung Electronics