Mounting The Set Under A Cabinet; Preparation; Mounting The Set - Philips AJL 700 User Manual

Mounting the Set under a Cabinet

Preparation

●
Ask a friend to help out. An extra hand to hold
the set makes mounting easier and quicker.
●
You may install the unit in the kitchen with or
without spacers.
a Find a mounting location near a wall outlet.
a
b Use the mounting template to test the design
and thickness of your kitchen cabinet bottom.
c Decide whether you want to connect the set
with other audio/ video equipment.
10
Template
b

Mounting the Set

For full details on how to use the Mounting kit,
please refer to the printed instructions in the
Quick Start Guide and Template.
VIDEO AUDIO IN TV
DC IN L R ANT
FM
AM
FRONT
IMPORTANT!
– Never plug in the AC power cord to
the power outlet before installation is
completed.
– Mount the set so that its AC power
cord can be plugged directly into a wall
outlet.
– Do not use a converter or extension
cord.
- Install the set as far as possible from
sources of interference, such as a
refrigerator, microwave oven, fluorescent
lamp, etc.
– There should be at least 2.5" distance
between the unit and the wall.
– To reduce the risk of fire, do
not place any heating or cooking
appliance beneath the set, especially
while the LCD screen is open or on
view.
Mount it
Ask a friend to help you mount the unit as it is quite heavy.
A
•
Cut the template to fit inside the cabinet. A
Template
• Align the template border marked "FRONT"
Recommended depth of cabinet
along the front edge of your cabinet.
at the rear to allow for connections • Use adhesive tape to fix the template.
•
Drill 1/4 inch holes (size X.X mm diameter, X
inch), as marked X on the template.
• Remove the template when you finish drilling.
Tip
– Use a nail to start each drill hole.
– Hold your drill firmly at 90o with the cabinet bottom and drill holes at
low speed.
– Clear wood shavings.
Use 1/4"
drill
B
Using the spacers
B
On the spacers, there are 4 pairs of notch length
Spacer
options. Depending on the thickness of you cabi-
net bottom (with/ without an overhang), these L (Low) L••H (4 heights)
notch lengths correspond to the 4 notch height in Arrow
the space holders, and allow you to adjust to the
best height to help you mount the unit.
•
Measure the height of the cabinet bottom
and/overhang.
•
T urn the spacer counterclockwise to determine
which of the 4 heights is most suitable: High • •
Low
•
Inser t the spacers accordingly.
C
•
Manually fasten the 4 screws down into the
spacer holder holes to mount your set. If the C
overhang is more than 1 1/4 inch, use longer
screws (not included).
Tip
T o prevent damage to your set, do not use an electric drill
to secure screws when mounting!
– Hold the unit horizontally when installing it, since the CD tray may
open if the unit is shaken.
– Use the cable manager to manage excess power cord length.