Switching on/ to standby and
selecting functions
1
Press POWER to switch on (or B on the
remote control).
2
To select your function, press SOURCE once
or more (or DVD, RADIO/BAND, TV or AV
on the remote control).
3
Press POWER to switch the set to standby (or
B on the remote control).
Helpful hints:
– In the standby mode, the tone, sound settings,
tuner presets, and the volume level (up to a
maximum volume level of 20) will be retained in
the set's memory.
DVD
Adjusting volume and sound
Adjusting Volume
●
Press VOL +/- to adjust the volume.
➜
Display shows VOLUME and. a number from
00 to 32.
DSC
Digital Sound Control enables you to select
predefined sound settings.
●
Press DSC repeatedly to select your desired
sound setting:
➜
CLASSIC, POP, MOVIE or SPEECH is
displayed.
●
Press OSD to check your DSC setting.
MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound.
➜
MUTE appears on the TV screen .
Playback continues without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOL controls.
●
AV
SHUFFLE
1
2
Basic functions
Display information
During playback, press CLK/DISP to switch
between the clock/timer display and the status of
the set (or on the remote control, DISPLAY).
1ALL
SHUFFLE PROG.
TV FM AM TIMER
CLOCK/TUNING
CLK/DISP
PRESET
MEM
VOL.
MHZ
kHZ
AJL700 KITCHEN DVD PLAYER
Adjusting picture
On the TV screen, you can adjust your picture
settings: Brightness, Contrast, Color and Tint.
On the remote control, press PICTURE once
or more to select BRIGHTNESS, CONTRAST,
COLOR and TINT.
Press VOL +/- to adjust the value between 00
and 100.
CLOCKSET
CLOCKSET
DSC
TIMER
PRESS TO
START / STOP
PICTURE
VOL
17