Power Supply; Inserting Batteries Into The Remote Control - Philips AJL 700 User Manual

Installation

Power supply

The type plate is located on the bottom
panel.
FM ANT
TV ANT
Using the adapter bracket
Find a suitable place to mount the adapter
bracket.
1
Use 2 small screws (supplied) to mount the
bracket.
2
Insert the adapter into the bracket as shown.
3
Use the adapter bracket to wrap and secure the
power cord so that excess cord does not hang
down.
4
Make sure all connections have been been made
before switching on the power supply.
12
AM ANT
DC-12V
R AUDIO IN L VIDEO IN
DC-12V
AC120V~
1
2
3
Inserting batteries into the
remote control
Insert two batteries (type R6 or AA) into the
remote control with the correct polarity as
indicated by the "+" and "-" symbols inside
the battery compartment.
CAUTION!
– Remove batteries if they are
exhausted or will not be used for a long
time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly.
Helpful hints:
– First, select the source you wish to
control by pressing a source button(DVD,
RADIO or TV for example).
– Then, select the desired functions ( í ,
ë , for example).