In Figure 4-32, click End button.
Scan Setup
In Figure 4-32, click Scan button.
Use direction buttons to set camera left limit and then click Left button.
Use direction buttons to set camera right limit and then click Right button. Now the scan setup
process is complete.
4.6.2.2 Call PTZ Function
Call Preset
In Figure 4-31, input preset value and then click
stop call.
Call Pattern
In Figure 4-31, input pattern value and then click
stop call.
Figure 4-35
Figure 4-36
to call a preset. Click
to call a pattern. Click
again to
again to
46