Resuming Operation - Panasonic CF-45 Series Reference Manual

Suspend/Hibernation Functions
Shutting Down Using the Suspend Function
Fn + F7
or Select [Suspend] from the [Start] menu
NOTE
When you select [Suspend] from the [Start] menu:
[Suspend] is deleted from the [Start] menu by unchecking [Allow Windows to manage
power use on this computer.] in [Start] - [Settings] - [Control Panel] - [Power] or by
unchecking [Show suspend command on Start menu] in [Advanced].

Resuming Operation

Slide the power switch
If security indicator ( ) is displayed upon sliding the power switch, your password has
been set.
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use the sus-
pend or hibernation functions again during this time, as this may subsequently cause
Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the suspend or hiber-
nation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC Cards may
not function properly. In such cases, you will need to restart your computer or
reinitialize the individual devices.
5
Suspend Mode