Automatic Storing - TESTO 400 Instruction Manual

Task: Automatic storing of the humidity/temperature conditions in front of and behind an air
heater together with two humidity probes, 100 values with printout of time dependency on an
attachable printer.
Procedure:
1) Preliminary check: Is everything set up properly?
- MEMORY - C
ONDITION
Note: MEMORY - R
The function box LOCATION - Change - E
folder/location and the stored folders/locations and data.
- Have the required locations been set up?
Function box LOCATION - C
N L :
EW OCATION
- Checking other configurations ...
MEMORY - K
EYLOCK
INSTRUMENT - P
?: For example, you have "Memory 45000 meas. values, 25 loca-
tions". This corresponds to the complete free memory of the basic
version with 100 kByte RAM. You can now store 5000 readings in
one location.
The free memory space is reduced as each location is added.
Maximum 25 locations can be set up.
The following applies to the above:
At least 2 (probes) x 100 (no. of readings) x 3 (channels per probe) =
600 values must be free. If necessary, erase the memory under
MEMORY - R
erases the data memory, the folders and locations are retained.
ESET
-
HANGE
Define location, e.g. "heater".
: The button panel can be locked if the instrument is not monitored
during measuring: once the password (3 digits) has been entered all of
the button functions are locked.
If the button panel is locked, the configurations can only be changed if
the correct password is entered. (The button panel is unlocked by
pressing any button + entering the password + activating the
function button.
functions like MEMORY - K
ROTECTION
main menu.
.
ESET
erases the respective selected
RASE
EYLOCK
30

Automatic storing

, the lock limits access to the
Unlock