Compass/Temperature/Audio; Average Fuel Economy; Distance To Empty (Dte); Tire Pressure Monitor (Tpm) - Jeep 2017 PATRIOT User Manual

within three seconds of resetting the cur-
rently displayed function. Reset ALL will be
displayed during this three-second window.

Compass/Temperature/Audio

Push and release the compass button to dis-
play one of eight compass headings to indi-
cate the direction the vehicle is facing, the
outside temperature, and the current radio
station.

Average Fuel Economy

Shows the average fuel economy since the
last reset (pushing and holding the right arrow
button as prompted in the instrument cluster
display to reset). When the fuel economy is
reset, the display will read "RESET" or show
dashes for two seconds. Then, the history
information will be erased, and the averaging
will continue from the last fuel reading before
the reset.

Distance To Empty (DTE)

Shows the estimated distance that can be
traveled with the fuel remaining in the tank.
This estimated distance is determined by a
weighted average of the instantaneous and
average fuel economy, according to the cur-
rent fuel tank level. This is not resettable.
NOTE:
Significant changes in driving style or vehicle
loading will greatly affect the actual drivable
distance of the vehicle, regardless of the DTE
displayed value.
When the DTE value is less than 30 miles
(48 km) estimated driving distance, the DTE
display will change to a text display of "LOW
FUEL." This display will continue until the
vehicle runs out of fuel. Adding a significant
amount of fuel to the vehicle will turn off the
"LOW FUEL" text and a new DTE value will be
displayed, based on the current values in the
DTE calculation and the current fuel tank
level.

Tire Pressure Monitor (TPM)

Refer to "Tire Pressure Monitoring System
(TPMS)" in "Safety" for system operation.

Elapsed Time

Shows the total elapsed time of travel since
the last reset. Elapsed time will increment
when the ignition is placed in the RUN/
START position.
Elapsed time is displayed as follows:
hours: minutes: seconds
Elapsed time can be reset by pushing and
holding the right arrow button (as prompted
in the display). Upon reset, all digits will
change to zeros, and time will start again if
the ignition is in the RUN or START position.

Display Units Of Measure In

To make your selection, push and release the
right arrow button until "US" or "METRIC"
appears.
Personal Settings (Customer-
Programmable Features)
This allows the driver to set and recall fea-
tures when the transmission is in PARK (au-
tomatic transmission) or the vehicle is
stopped (manual transmission).
65