Four-Wheel Drive Operation - If Equipped; Speed Control - Jeep 2017 PATRIOT User Manual

FOUR-WHEEL DRIVE
OPERATION — IF EQUIPPED
This feature provides full time, on-demand,
four–wheel drive (4WD).
Four-Wheel Drive Switch
Where one or more wheels have wheel spin or
if additional traction is needed in sand, deep
snow, or loose traction surfaces, activate the
"4WD LOCK" switch by pulling up once and
releasing. This locks the center coupling al-
lowing more torque to be sent to the rear
wheels. The "4WD Indicator Light" will come
on in the cluster. This can be done on the fly,
at any vehicle speed. To deactivate, simply
pull on the switch one more time. The "4WD
Indicator Light" will then go out.
NOTE:
Refer to "Electronic Brake Control System/
Electronic Stability Control
"Safety" for further information.

SPEED CONTROL

When engaged, the Speed Control takes over
accelerator operations at speeds greater than
25 mph (40 km/h).
The Speed Control buttons are located on the
right side of the steering wheel.
(ESC)" in
Speed Control Buttons
1 — Push Cancel
2 — Push On/Off
3 — Push Resume/Accel
4 — Push Set/Decel
NOTE:
In order to ensure proper operation, the
Speed Control System has been designed to
129