Fujitsu PRIMERGY RX100 S6 Options Manual page 58

TPM
Figure 43: Fastening the TPM
Ê Insert the TPM on the system board (1).
Ê Fasten the TPM with the special screw for the TPM (2).
Please use the TPM screwdriver insert bit to tighten the special screw.
I
Do not fasten the screw too tightly (torque value of 0.6 Nm).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
58
63.
Options Guide
RX100 S6