Fujitsu PRIMERGY RX100 S6 Options Manual page 24

Opening the server
Figure 2: Pulling the server out of the rack
Ê Unscrew the two knurled screws (1).
Ê Pull the server as far as it will go out of the rack (2).
Ê Release the locking mechanism (a or b) of both rails (3).
Ê Pull the server carefully out of the rails and place it on a flat support.
Figure 3: Loosening the two knurled screws
Ê Unlock the top cover by removing the two knurled screws at the rear side (1).
24 Options Guide
RX100 S6